
ArF Immersion Lithography
ArF immersion lithography is an exposure process used to draw tiny circuits onto computer chips. It uses light with a wavelength of 193 nanometers and a layer of water between the lens and the chip to create finer structures than would be possible with air.
When manufacturing a computer chip, circuits are drawn onto a coated silicon wafer using light — similar to exposing a photograph. The shorter the wavelength of the light used, the finer the lines that can be drawn. ArF immersion lithography uses an argon fluoride laser for this, which produces light with a wavelength of 193 nanometers — about 4000 times thinner than a human hair. The decisive trick is delivered by the “immersion” in the name: between the last lens of the system and the chip surface lies a thin layer of ultrapure water. Water bends light more strongly than air, which considerably increases the effective resolution — without having to change the laser itself.
Why water changed chip manufacturing
The resolution of an exposure system depends on two things: the wavelength of the light and the so-called numerical aperture value, which describes how strongly the light can be gathered. Water has a higher refractive index than air — it bends light more strongly, so that the same light can be focused more sharply. Specifically, water allows the numerical aperture value to be increased from below 1.0 to values above 1.3. That sounds like a small number, but in practice it means significantly finer structures on the chip.
Without this trick, the chip industry would have hit a physical limit as early as the beginning of the 2000s. Shorter wavelengths would have required entirely new, extremely expensive laser systems. The water layer, by contrast, was an elegant and comparatively inexpensive solution that allowed existing equipment to be further developed. It pushed back the limit of what was feasible by almost a decade — giving the industry time to prepare the next generation.
Multiple patterning: how even finer structures are created
A single exposure step with ArFi today can achieve structure sizes down to about 38 nanometers. To create even smaller structures, the same area is exposed multiple times from slightly offset angles or with different masks — this is called multiple exposure, or in English, multi-patterning. The individual patterns are layered on top of one another in such a way that together they produce finer lines than a single step could deliver.
This process is elaborate: three, four, or even more exposure steps for a single layer of a chip are not uncommon. Each additional step costs time and money and increases the risk of alignment errors. Nevertheless, the combination of ArFi and multiple patterning enables structures down to 7 nanometers — chips found today in smartphones and laptops were often manufactured using exactly this process.
A common misconception is to equate the structure size on the chip directly with the light wavelength. This is not correct: through multiple patterning and special mask techniques, 193-nanometer light can be used to create structures that are many times smaller than the wavelength itself.
ArFi in the chip industry today
ArF immersion lithography is by far the most commonly used exposure process in chip manufacturing. Manufacturers such as TSMC, Samsung, and Intel use it for the majority of their production steps — even in modern fabs that already work with EUV lithography (a newer process using even shorter light). EUV handles the most critical, finest layers, while ArFi takes care of the remaining layers because it is faster and cheaper.
The term appears in trade press coverage when reporting on supply shortages for exposure equipment, new manufacturing nodes, or competition between chip manufacturers. ASML, the Dutch company that is the sole global manufacturer of EUV machines, also produces the market-leading ArFi systems — giving the company a key role in the global chip supply chain. Anyone who wants to understand the headlines surrounding semiconductor supply chains cannot avoid ArFi.
In the long term, EUV will take over further tasks for the finest structures. However, ArFi is expected to remain an indispensable part of chip production for many years to come — simply because no manufacturer shies away from the cost of completely replacing a proven technology as long as it works reliably.